Recliner Chair Remote Not Working? Here is How to Fix It?

If you’re relaxing in your favorite recliner chair, but suddenly find yourself frustrated because the remote control isn’t working, you’re not alone.

Recliner chair remotes can sometimes act up, leaving you puzzled about what to do next.

Don’t worry; we’ve got you covered. In this comprehensive guide, we’ll walk you through the steps to troubleshoot and fix a recliner chair remote that’s not working.

Whether it’s a simple battery issue or a more complex problem, we’ll help you regain control of your comfort.

Troubleshooting Steps to Recliner Chair Remote Not Working

Try out these troubleshooting steps and make your remote control function again.

Step 1: Check the Batteries

Sometimes, the most common issues have the simplest solutions. Start by ensuring that the batteries in your remote control are fresh and properly inserted. If they’re running low, replace them with new ones and try again.

Step 2: Verify Power Connection

Make sure the power cord is securely connected to the recliner and the power outlet. A loose connection could prevent the remote from functioning correctly.

Step 3: Examine the Motor and Control Module

Inspect the motor and control module for any visible signs of damage or loose wires. If you notice any issues, it’s advisable to contact a professional for repairs, as these components can be complex.

Step 4: Reset the System

If your recliner chair has a reset button, press it to reset the system. This action can often resolve minor glitches and restore normal functionality.

Step 5: Check the DIN Plug

Examine the DIN plug that connects the remote to the control module.

check the din plug

Ensure it’s properly connected and undamaged. A loose or damaged plug can disrupt communication between the remote and the chair.

Step 6: Troubleshoot Remote Signals

If the remote control appears fine but isn’t communicating with the chair, try these steps:

  • Move closer to the chair while operating the remote.
  • Ensure there are no obstacles blocking the remote’s signal.
  • Replace the remote’s batteries again, just to be sure.

Step 7: Use the Do Not Disturb Button

If the “Do Not Disturb” button is activated, the remote’s functions may be temporarily disabled. Press the button again to deactivate it and regain control.

Step 8: Perform a Hard Reset

If none of the above steps work, performing a hard reset might do the trick. Disconnect the power cord from the outlet and wait for a few minutes. Then, reconnect it and try using the remote again.

How to Manually Recline an Electric Recliner?

If you can’t fix your remote control and want to recline your electric recliner manually, here’s a step-by-step guide:

Step 1: Locate the Release Lever

Begin by identifying the release lever on your electric recliner. It’s typically located on the bottom or side of the chair, near the reclining mechanism.

locate the lever and engage it

Step 2: Engage the Release Lever

Gently pull or push the release lever, depending on its design, to disengage the reclining mechanism. This action allows you to manually adjust the chair’s position.

Step 3: Recline the Chair

Once the release lever is engaged, apply steady pressure to the backrest of the chair. Gradually lean back, and you’ll feel the chair reclining. Keep applying pressure until you’ve reached your desired reclined position.

Step 4: Lock the Reclined Position

Some recliners have a locking mechanism that secures the chair in a reclined position. If your chair has this feature, ensure that it’s engaged by checking for a locking lever or knob near the reclining mechanism.

Step 5: Return to the Upright Position

To return the chair to an upright position, push the release lever back to its original position. Apply slight pressure to the footrest and gently push the chair forward until it’s fully upright.


Don’t let a malfunctioning recliner chair remote get in the way of your comfort.

By following these troubleshooting steps, you’ll be well-equipped to identify and fix common issues that may arise. Remember that while some problems can be resolved with DIY methods, more intricate issues might require professional assistance.

Keep your recliner chair in tip-top shape, and you’ll continue to enjoy its luxurious comfort for years to come.

Frequently Asked Questions

Do Electric Recliners Work Manually?

Yes, many electric recliners have a manual recline feature as a backup. Using a release lever or tab, you can lean back to activate the recline mechanism and lock it in place once comfortable.

This manual option ensures reclining even without the remote control or during malfunctions.

Do Electric Recliners Go Bad?

Indeed, electric recliners can develop issues over time. These range from minor glitches to more serious malfunctions involving motors, control modules, wiring, or remotes.

Proper care, maintenance, and adherence to usage guidelines can extend their lifespan. However, factors like wear and tear, power surges, or manufacturing defects might contribute to problems.

Arshad Afridi
Hi, I'm Arshad Afridi, a furniture enthusiast with 3 years of experience in the recliner, chair, and sofa industry. I have a passion for creating comfortable and functional furniture pieces that enhance the beauty of any space. Join me on my blog as I share my expertise and insights on the latest furniture trends and design inspirations.